Revive Turbo Cleaner & Power Restorer For Petrol & Diesel Engines
Revive treatments are safe water based, non toxic, non corrosive and non flammable fluids, using technology developed and used for the cleaning and maintenance of aviation jet engines, power station turbines, large marine diesel engines and now automotive engines.
The treatment is sprayed into the vehicle’s intake system before the turbo inlet whilst the engine is running. As the fluid passes through the engine, the active ingredients lock on to built up oily/carbon deposits and strips away surface layers. These tiny carbonised particles are no larger than the soot particles the engine naturally generates, making the process safe for vehicles fitted with catalysts and filters.
The technology behind Revive treatments was developed for the aviation industry and power generation. It’s used to clean aeroplane jet engines and keep power station turbines in top working condition.
All Revive fluid is biodegradable, non toxic, safe to use and non flammable.
Easy To Use
An engine treatment is so simple to perform, the fluid is sprayed into the inlet system pre-turbo, no need to remove or dismantle the turbo, just unclip the inlet trunking.
Repair With Revive
Revive is used to clean engine systems that already have problems caused by soot & oily build up.
By performing three Revive cleaning doses on the vehicle, carbonised layers are removed gradually, making the engine cleaning process very safe.
Restores Economy, Power & Emmissions
Cleaning the turbo and other engine internals helps restore fuel economy, regains lost power and reduce exhaust emissions.
Variable Vane Turbos
Variable nozzle / vane technology can be a major cause of turbo problems due to sticking turbo vanes, cleaning with Revive helps remove soot & oil from the mechanism to restore normal movement.
Performing a full Revive clean to repair and fix problems is straight forward, quick and easy to carry out and a preventative Service Shot treatment is even quicker to perform
Starting with a cold engine, unclip the intake trunking after the airfilter.
(This 3 step process can be completed in just 10 minutes)
Spray Revive in 3 doses of 250ml into the intake, 1st with the engine running at 2200 RPM, next at 1800 RPM, stop the engine for 3 minutes, re-start the engine then finally at 2000 RPM.
Keep the engine running for a few more minutes until the Revive has worked out of the system.
Take the vehicle for a brisk drive of about 20 minutes, this allows Revive to do its work.
The Revive cleaning process can be performed before a service, this allows the vehicle to be checked over and filled with clean oil.
Revive Turbo Cleaner Starter Kit for Petrol Engines - 750ml 1449-9400
Revive Turbo Cleaner Starter Kit for Deisel Engines - 750ml 1449-9000